Predicting spinal column profile from surface topography via 3D non-contact surface scanning.

INTRODUCTION: 3D Non-Contact surface scanning (3DSS) is used in both biomechanical and clinical studies to capture accurate 3D images of the human torso, and to better understand the shape and posture of the spine-both healthy and pathological. This study sought to determine the efficacy and accuracy of using 3DSS of the posterior torso, to determine the curvature of the spinal column in the lateral lying position. METHODS: A cohort of 50 healthy adults underwent 3DSS and Magnetic Resonance Imaging (MRI) to correlate the contours of the external spine surface with the internal spinal column. The correlation analysis was composed of two phases: (1) MRI vertebral points vs MRI external spine surface markers; and (2) MRI external spine surface markers vs 3DSS external spine surface markers. The first phase compared the profiles of fiducial markers (vitamin capsules) adhered to the skin surface over the spinous processes against the coordinates of the spinous processes-assessing the linear distance between the profiles, and similarity of curvature, in the sagittal and coronal planes. The second phase compared 3DSS external spine surface markers with the MRI external spine surface markers in both planes, with further qualitative assessment for postural changes. RESULTS: The distance between the MRI vertebral points and MRI external spine surface markers showed strong statistically significant correlation with BMI in both sagittal and coronal planes. Kolmogorov-Smirnov (KS) tests showed similar no significant difference in curvature, k, in almost all participants on both planes. In the second phase, the coronal 3DSS external spine surface profiles were statistically different to the MRI external spine surface markers in 44% of participants. Qualitative assessment showed postural changes between MRI and 3DSS measurements in these participants. CONCLUSION: These study findings demonstrate the utility and accuracy of using anatomical landmarks overlaid on the spinous processes, to identify the position of the spinal bones using 3DSS. Using this method, it will be possible to predict the internal spinal curvature from surface topography, provided that the thickness of the overlaying subcutaneous adipose layer is considered, thus enabling postural analysis of spinal shape and curvature to be carried out in biomechanical and clinical studies without the need for radiographic imaging.

Progressive Camptocormia With Head Drop and Dysphagia.

A 72-year-old man had mild proximal weakness that developed into progressive camptocormia, head drop, numbness, and significant muscle wasting. What is your diagnosis?

A Review of the Methods on Cobb Angle Measurements for Spinal Curvature.

Scoliosis is a common disease of the spine and requires regular monitoring due to its progressive properties. A preferred indicator to assess scoliosis is by the Cobb angle, which is currently measured either manually by the relevant medical staff or semi-automatically, aided by a computer. These methods are not only labor-intensive but also vary in precision by the inter-observer and intra-observer. Therefore, a reliable and convenient method is urgently needed. With the development of computer vision and deep learning, it is possible to automatically calculate the Cobb angles by processing X-ray or CT/MR/US images. In this paper, the research progress of Cobb angle measurement in recent years is reviewed from the perspectives of computer vision and deep learning. By comparing the measurement effects of typical methods, their advantages and disadvantages are analyzed. Finally, the key issues and their development trends are also discussed.

The impact of preoperative supine radiographs on surgical strategy in adult spinal deformity.

OBJECTIVE: Preoperative planning for adult spinal deformity (ASD) surgery is essential to prepare the surgical team and consistently obtain postoperative alignment goals. Positional imaging may allow the surgeon to evaluate spinal flexibility and anticipate the need for more invasive techniques. The purpose of this study was to determine whether spine flexibility, defined by the change in alignment between supine and standing imaging, is associated with the need for an osteotomy in ASD surgery. METHODS: A single-center, dual-surgeon retrospective analysis was performed of adult patients with ASD who underwent correction of a thoracolumbar deformity between 2014 and 2018 (pelvis to upper instrumented vertebra between L1 and T9). Patients were stratified into osteotomy (Ost) and no-osteotomy (NOst) cohorts according to whether an osteotomy was performed (Schwab grade 2 or higher). Demographic, surgical, and radiographic parameters were compared. The sagittal correction from intraoperative prone positioning alone (sagittal flexibility percentage [Sflex%]) was assessed by comparing the change in lumbar lordosis (LL) between preoperative supine to standing radiographs and preoperative to postoperative alignment. RESULTS: Demographics and preoperative and postoperative sagittal alignment were similar between the Ost (n = 60, 65.9%) and NOst (n = 31, 34.1%) cohorts (p > 0.05). Of all Ost patients, 71.7% had a grade 2 osteotomy (mean 3 per patient), 21.7% had a grade 3 osteotomy, and 12.5% underwent both grade 3 and grade 2 osteotomies. Postoperatively, the NOst and Ost cohorts had similar pelvic incidence minus lumbar lordosis (PI-LL) mismatch (mean PI-LL 5.2° vs 1.2°; p = 0.205). Correction obtained through positioning (Sflex%) was significantly lower for in the osteotomy cohort (38.0% vs 76.3%, p = 0.004). A threshold of Sflex% < 70% predicted the need for osteotomy at a sensitivity of 78%, specificity of 56%, and positive predictive value of 77%. CONCLUSIONS: The flexibility of the spine is quantitatively related to the use of an osteotomy. Prospective studies are needed to determine thresholds that may be used to standardize surgical decision-making in ASD surgery.

Bilateral open sacroiliac joint fusion during adult spinal deformity surgery using triangular titanium implants: technique description and presentation of 21 cases.

OBJECTIVE: Pelvic fixation enhances long constructs during deformity surgery. Subsequent loosening of iliac screws and pain at the pelvis occur in as many as 29% of patients. Concomitant sacroiliac (SI) fusion may prevent potential pain and failure. The objective of this study was to describe a novel surgical technique and a single institution's experience using bilateral SI fusion during adult deformity surgery with S2-alar-iliac (S2AI) screws and triangular titanium rods (TTRs) placed with navigation. METHODS: The authors reviewed open SI joint fusions with TTR performed between August 2019 and March 2020. All patients underwent lumbosacral fusion through a midline approach and bilateral S2AI pelvic fixation in the caudal teardrop, followed by TTR placement just proximal and cephalad to the S2AI screws using intraoperative CT imaging guidance. RESULTS: Twenty-one patients were identified who received 42 TTRs, ranging in size from 7.0 × 65 mm to 7.0 × 90 mm. Three TTRs (7%) were malpositioned intraoperatively, and each was successfully repositioned during index surgery without negative sequelae. All breaches occurred in a medial and cephalad direction into the pelvis. Incremental operative time for adding TTR averaged 8 minutes and 33 seconds per implant. CONCLUSIONS: Image-guided open SI joint fusion with TTR during lumbosacral fusion is technically feasible. The bony corridor for implant placement is narrower cephalad, and implants tend to deviate medially into the pelvis. Detection of malpositioned implant is aided with intraoperative CT, but this can be salvaged. A prospective randomized clinical trial is underway that will better inform the impact of this technique on patient outcomes.

Impact of an intraoperative coronal spinal alignment measurement technique using a navigational tool for a 3D spinal rod bending system in adult spinal deformity cases.

OBJECTIVE: In corrective spinal surgery for adult spinal deformity (ASD), the focus has been on achieving optimal spinopelvic alignment. However, the correction of coronal spinal alignment is equally important. The conventional intraoperative measurement methods currently used for coronal alignment are not ideal. Here, the authors have developed a new intraoperative coronal alignment measurement technique using a navigational tool for a 3D spinal rod bending system (CAMNBS). The purpose of this study was to test the feasibility of using the CAMNBS for coronal spinal alignment and to evaluate its usefulness in corrective spinal surgery for ASD. METHODS: In this retrospective cohort study, patients with degenerative lumbar kyphoscoliosis, a Cobb angle ≥ 20°, and lumbar lordosis ≤ 20° who had undergone corrective surgery (n = 67) were included. The pelvic teardrops on both sides, the S1 spinous process, the central point of the apex, a point on the 30-mm cranial (or caudal) side of the apex, and the central point of the upper instrumented vertebra (UIV) and C7 vertebra were registered using the CAMNBS. The positional information of all registered points was displayed as 2D figures on a monitor. Deviation of the UIV plumb line from the central sacral vertical line (UIV-CSVL) and deviation of the C7 plumb line from the CSVL (C7-CSVL) were measured using the 2D figures. Nineteen patients evaluated using the CAMNBS (BS group) were compared with 48 patients evaluated using conventional intraoperative radiography (XR group). The UIV-CSVL measured intraoperatively using the CAMNBS was compared with that measured using postoperative radiography. The prevalence of postoperative coronal malalignment (CM) and the absolute value of postoperative C7-CSVL were compared between the groups on radiographs obtained in the standing position within 4 weeks after surgery. Postoperative CM was defined as the absolute value of C7-CSVL ≥ 30 mm. Further, the measurement time and amount of radiation exposure were measured. RESULTS: No significant differences in demographic, sagittal, and coronal parameters were observed between the two groups. UIV-CSVL was 2.3 ± 9.5 mm with the CAMNBS and 1.8 ± 16.6 mm with the radiographs, showing no significant difference between the two methods (p = 0.92). The prevalence of CM was 2/19 (10.5%) in the BS group and 18/48 (37.5%) in the XR group, and absolute values of C7-CSVL were 15.2 ± 13.1 mm in the BS group and 25.0 ± 18.0 mm in the XR group, showing statistically significant differences in both comparisons (p = 0.04 and 0.03, respectively). The CAMNBS method required 3.5 ± 0.9 minutes, while the conventional radiograph method required 13.3 ± 1.5 minutes; radiation exposure was 2.1 ± 1.1 mGy in the BS group and 2.9 ± 0.6 mGy in the XR group. Statistically significant differences were demonstrated in both comparisons (p = 0.0002 and 0.03, respectively). CONCLUSIONS: From this study, it was evident that the CAMNBS did not increase postoperative CM compared with that seen using the conventional radiographic method, and hence can be used in clinical practice.

Association of findings on preoperative extension lateral cervical radiography with osteotomy type, approach, and postoperative cervical alignment after cervical deformity surgery.

OBJECTIVE: The authors' objective was to determine whether preoperative lateral extension cervical spine radiography can be used to predict osteotomy type and postoperative alignment parameters after cervical spine deformity surgery. METHODS: A total of 106 patients with cervical spine deformity were reviewed. Radiographic parameters on preoperative cervical neutral and extension lateral radiography were compared with 3-month postoperative radiographic alignment parameters. The parameters included T1 slope, C2 slope, C2-7 cervical lordosis, cervical sagittal vertical axis, and T1 slope minus cervical lordosis. Associations of radiographic parameters with osteotomy type and surgical approach were also assessed. RESULTS: On extension lateral radiography, patients who underwent lower grade osteotomy had significantly lower T1 slope, T1 slope minus cervical lordosis, cervical sagittal vertical axis, and C2 slope. Patients who achieved more normal parameters on extension lateral radiography were more likely to undergo surgery via an anterior approach. Although baseline parameters were significantly different between neutral lateral and extension lateral radiographs, 3-month postoperative lateral and preoperative extension lateral radiographs were statistically similar for T1 slope minus cervical lordosis and C2 slope. CONCLUSIONS: Radiographic parameters on preoperative extension lateral radiography were significantly associated with surgical approach and osteotomy grade and were similar to those on 3-month postoperative lateral radiography. These results demonstrated that extension lateral radiography is useful for preoperative planning and predicting postoperative alignment.

Femoral head to lower lumbar neural foramen distance as a novel radiographic parameter to predict postoperative stretch neuropraxia.

OBJECTIVE: Lumbosacral fractional curves in adult spinal deformity (ASD) patients often have sharp coronal curves resulting in significant pain and imbalance. Postoperative stretch neuropraxia after fractional curve correction can lead to discomfort and unsatisfactory outcomes. The goal of this study was to use radiographic measures to increase understanding of the relationship between postoperative stretch neuropraxia and fractional curve correction. METHODS: In 62 ASD patients treated from 2015 to 2018, radiographic review was performed, including measurement of the distance between the lower lumbar neural foramen (L4 and L5) in the concavity and convexity of the lumbosacral fractional curve and the ipsilateral femoral heads (FHs; L4-FH and L5-FH) in pre- and postoperative anteroposterior spine radiographs. The largest absolute preoperative to postoperative change in distance between the lower lumbar neural foramen and the ipsilateral FH (ΔL4/L5-FH) was used for analysis. Chi-square analyses, independent and paired t-tests, and logistic regression were performed to study the relationship between L4/L5-FH and stretch neuropraxia for categorical and continuous variables, respectively. RESULTS: Of the 62 patients, 13 (21.0%) had postoperative stretch neuropraxia. Patients without postoperative stretch neuropraxia had an average ΔL4-FH distance of 16.2 mm compared to patients with stretch neuropraxia, who had an average ΔL4-FH distance of 31.5 mm (p < 0.01). Patients without postoperative neuropraxia had an average ΔL5-FH distance of 11.1 mm compared to those with stretch neuropraxia, who had an average ΔL5-FH distance of 23.0 mm (p < 0.01). Chi-square analysis showed that patients had a 4.78-fold risk of developing stretch neuropraxia with ΔL4-FH > 20 mm (95% CI 1.3-17.3) and a 5.17-fold risk of developing stretch neuropraxia with ΔL5-FH > 15 mm (95% CI 1.4-18.7). Logistic regression analysis indicated that the odds of developing stretch neuropraxia were 15:1 with a ΔL4-FH > 20 mm (95% CI 3-78) and 21:1 with a ΔL5-FH > 15 mm (95% CI 4-113). CONCLUSIONS: The novel ΔL4/L5-FH distances are strongly associated with postoperative stretch neuropraxia in ASD patients. A ΔL4-FH > 20 mm and ΔL5-FH > 15 mm significantly increase the odds for patients to develop postoperative stretch neuropraxia.

Acute failure of S2-alar-iliac screw pelvic fixation in adult spinal deformity: novel failure mechanism, case series, and review of the literature.

OBJECTIVE: Pelvic fixation with S2-alar-iliac (S2AI) screws is an established technique in adult deformity surgery. The authors' objective was to report the incidence and risk factors for an underreported acute failure mechanism of S2AI screws. METHODS: The authors retrospectively reviewed a consecutive series of ambulatory adults with fusions extending 3 or more levels, and which included S2AI screws. Acute failure of S2AI screws was defined as occurring within 6 months of the index surgery and requiring surgical revision. RESULTS: Failure occurred in 6 of 125 patients (5%) and consisted of either slippage of the rods or displacement of the set screws from the S2AI tulip head, with resultant kyphotic fracture. All failures occurred within 6 weeks postoperatively. Revision with a minimum of 4 rods connecting to 4 pelvic fixation points was successful. Two of 3 (66%) patients whose revision had less fixation sustained a second failure. Patients who experienced failure were younger (56.5 years vs 65 years, p = 0.03). The magnitude of surgical correction was higher in the failure cohort (number of levels fused, change in lumbar lordosis, change in T1-pelvic angle, and change in coronal C7 vertical axis, each p < 0.05). In the multivariate analysis, younger patient age and change in lumbar lordosis were independently associated with increased failure risk (p < 0.05 for each). There was a trend toward the presence of a transitional S1-2 disc being a risk factor (OR 8.8, 95% CI 0.93-82.6). Failure incidence was the same across implant manufacturers (p = 0.3). CONCLUSIONS: All failures involved large-magnitude correction and resulted from stresses that exceeded the failure loads of the set plugs in the S2AI tulip, with resultant rod displacement and kyphotic fractures. Patients with large corrections may benefit from 4 total S2AI screws at the time of the index surgery, particularly if a transitional segment is present. Salvage with a minimum of 4 rods and 4 pelvic fixation points can be successful.

Institution-wide shape analysis of 3D spinal curvature and global alignment parameters.

The spine is an articulated, 3D structure with 6 degrees of translational and rotational freedom. Clinical studies have shown spinal deformities are associated with pain and functional disability in both adult and pediatric populations. Clinical decision making relies on accurate characterization of the spinal deformity and monitoring of its progression over time. However, Cobb angle measurements are time-consuming, are limited by interobserver variability, and represent a simplified 2D view of a 3D structure. Instead, spine deformities can be described by 3D shape parameters, addressing the limitations of current measurement methods. To this end, we develop and validate a deep learning algorithm to automatically extract the vertebral midline (from the upper endplate of S1 to the lower endplate of C7) for frontal and lateral radiographs. Our results demonstrate robust performance across datasets and patient populations. Approximations of 3D spines are reconstructed from the unit normalized midline curves of 20,118 pairs of full spine radiographs belonging to 15,378 patients acquired at our institution between 2008 and 2020. The resulting 3D dataset is used to describe global imbalance parameters in the patient population and to build a statistical shape model to describe global spine shape variations in preoperative deformity patients via eight interpretable shape parameters. The developed method can identify patient subgroups with similar shape characteristics without relying on an existing shape classification system.

Analysis of apex and transitional vertebra of the spine according to pelvic incidence using orientation and position parameters.

OBJECTIVE: To identify the different apex and transitional vertebra according to the shape of the pelvis of individuals despite their difference in sagittal alignment using our measurement system. METHODS: Full-spine X-rays using EOS in standard stand-position of 99 volunteers were selected (47 women, 52 men, mean age 31 years old). Validated 3D reconstruction technique allows extraction of spinopelvic parameters, and position and rotation of each vertebra and lumbar disks. Subjects were divided into three groups: low PI (lowPI, n = 37), moderate PI (midPI, n = 52), high PI (highPI, n = 10), with, respectively, a PI below 45°, between 45° and 60° and above 60°. Occurrence of specific position and rotation values of apex and transitional vertebra were assessed in each group. RESULTS: Frequency curves tend to move cranially when the incidence increases except in cervicothoracic where T1 is a constant for all shapes of spine with occurrence approaching 90%. Angulation value of relevant vertebra and lumbar lordosis are significantly positively correlated for the whole population. CONCLUSIONS: Our study allowed the assessment of the distribution of spine curvatures according to the pelvic incidence. It describes the occurrence of localization of the apex and transitional vertebrae according to pelvic incidence. These results should be taken into account during the analysis of the sagittal balance, especially when planning deformity surgery in adults.

Comparison of Clinical Outcomes and Complications of Primary and Revision Surgery Using a Combined Anterior and Posterior Approach in Patients with Adult Spinal Deformity and Sagittal Imbalance.

BACKGROUD: The purpose of this study was to compare clinical outcomes and complications of primary and revision surgery in patients with adult spinal deformity (ASD) accompanied by sagittal imbalance. Revision surgery has been associated with poor clinical outcomes and increased risk of complications. Previous studies comparing primary versus revision surgery included data for a wide variety of diseases and ages, but few investigated patients with ASD with sagittal imbalance undergoing anterior and posterior combined surgery. METHODS: Retrospective cohort analysis of prospectively collected data. We identified 60 consecutive patients with ASD combined with sagittal imbalance who underwent primary or revision surgery; of these, 6 patients were excluded for lack of a minimal 2-year follow-up. Patients' surgical and radiological data, clinical outcomes, and complications were reviewed. RESULTS: There were 30 patients in the primary group and 24 patients in the revision group. Patient characteristics, including the prevalence of sarcopenia, were similar between the two groups. Pedicle subtraction osteotomy was performed more frequently in the revision group although there was no statistically significant difference between groups. The primary group had more proximal junctional problems, whereas the revision group had more rod breakage (p < 0.05). There were significant improvements in clinical outcomes in both groups when the preoperative and 2-year postoperative values were compared. The Oswestry disability index and visual analog scale score were similar in both groups 2 years postoperatively. CONCLUSIONS: Considering the greater pain and disability at the time of the revision procedure, revision patients benefited more from surgery at the 2-year follow-up than the primary surgery patients. Complication rates were similar between the groups except for proximal junctional problems and rod breakage. Therefore, revision surgery should not be avoided in the treatment of ASD patients with sagittal imbalance.

«El convento de las monjas torcidas». Síndrome de Pisa y camptocormia inducido por antipsicóticos / “The bent nuns convent”. Antipsycotic-induced Pisa Syndrome and Camptocormia

La camptocormia y el sídrome de Pisa (pleurothotonus) se caracteriza por una postura anormal en el tronco, con una flexión de la columna toracolumbar de entre 15-45° durante la bipedestación y la marcha que se corrige completamente con el decúbito supino. Se asocia a la enfermedad de Parkinson y a otras enfermedades neurodegenerativas, siendo su fisiopatología incierta. Se presentan 3 casos de camptocormia secundaria a antipsicóticos atípicos (AU)

Camptocormia is an involuntary flexion between 15-45° of the thoracolumbar spine when standing, walking or sitting, which disappears completely in the supine position. Is associated to Parkinson's disease and other neurodegenerative conditions, being its physiopatology unknown. We report three cases of atypical anti-psychotic induced camptocormia (AU)

The impact of sagittal imbalance on walking in patients with lumbar spinal canal stenosis.

PURPOSE: Gait and posture disorder severely impedes the quality of life of affected patients with lumbar spinal canal stenosis (LSCS). Despite the major health concern, there is a paucity of literature about the relationships among spatiotemporal gait parameters and spinal sagittal parameters. This is a cross sectional study performed in a single tertiary referral center to determine the relationships among spatiotemporal gait parameters and spinal sagittal parameters in patients with LSCS. METHODS: A total of 164 consecutive patients with LSCS, 87 men and 77 women with mean age of 70.7 years, were enrolled. Spatiotemporal gait parameters were studied using a gait analysis system. Spinal sagittal parameters were studied including sagittal vertical axis (SVA), thoracic kyphosis (TK), lumbar lordosis (LL), sacral slope (SS), pelvic inclination (PI), and pelvic tilt (PT) both in the neutral and stepped positions. RESULTS: SVA was significantly larger in the stepped position than in the neutral position (neutral position, 72.5 mm; stepped position, 96.8 mm; p = 0.003). Parameters regarding the pelvis exhibited significant differences, which could represent pelvic anteversion in the stepped position. By stepwise multiple regression analysis, the prediction models, containing SVA (neutral) and PT (stepped) for double supporting phase, exhibited statistical significance, and accounted for approximately 50% of the variance. CONCLUSIONS: The present study provides statistically established evidence of correlation among spatiotemporal gait parameters and spinal sagittal parameters. Differences between sagittal parameters in neutral and stepped position may stand for the postural control during gait cycle, and increased SVA in neutral position and increased PT in stepped position may correlate with prolonged double supporting phase.

Toward the Development of a Comprehensive Clinically Oriented Patient Profile: A Systematic Review of the Purpose, Characteristic, and Methodological Quality of Classification Systems of Adult Spinal Deformity.

BACKGROUND: Existing adult spinal deformity (ASD) classification systems are based on radiological parameters but management of ASD patients requires a holistic approach. A comprehensive clinically oriented patient profile and classification of ASD that can guide decision-making and correlate with patient outcomes is lacking. OBJECTIVE: To perform a systematic review to determine the purpose, characteristic, and methodological quality of classification systems currently used in ASD. METHODS: A systematic literature search was conducted in MEDLINE, EMBASE, CINAHL, and Web of Science for literature published between January 2000 and October 2018. From the included studies, list of classification systems, their methodological measurement properties, and correlation with treatment outcomes were analyzed. RESULTS: Out of 4470 screened references, 163 were included, and 54 different classification systems for ASD were identified. The most commonly used was the Scoliosis Research Society-Schwab classification system. A total of 35 classifications were based on radiological parameters, and no correlation was found between any classification system levels with patient-related outcomes. Limited evidence of limited quality was available on methodological quality of the classification systems. For studies that reported the data, intraobserver and interobserver reliability were good (kappa = 0.8). CONCLUSION: This systematic literature search revealed that current classification systems in clinical use neither include a comprehensive set of dimensions relevant to decision-making nor did they correlate with outcomes. A classification system comprising a core set of patient-related, radiological, and etiological characteristics relevant to the management of ASD is needed.

Sagittal curvature of the spine as a predictor of the pediatric spinal deformity development.

BACKGROUND: The sagittal curvature of the spine is hypothesized to play an important role in induction of spinal deformities in adolescent idiopathic scoliosis. We previously showed an S shaped flexible rod, with the same curvature as the pediatric sagittal spinal curve, produces scoliotic-like deformities under physiologic loading. Yet, detailed characteristics of the pediatric sagittal spinal curves associated with higher risk of scoliosis are not well defined. METHODS: A total of 32 patients in a population with a high prevalence of idiopathic-like scoliosis, 22q11.2 deletion syndrome (22q), were included and followed up for at least two-years. We developed a reduced order finite element model (FEM) of the sagittal profile of these 32 patients where the spine was modeled as an S shaped elastic rod. We related the geometrical parameters of the sagittal curves and the deformed FEM of the corresponding S shaped rods to the risk of scoliosis development at two-year follow-up in this cohort. RESULTS: Variations in the sagittal curvature in the cohort of 22q patients resulted in five different deformity patterns shown by finite element analyses. Two sagittal plane deformity pattern groups had high rate of scoliosis development (86% and 100%) whereas the other 3 groups had less than 50% rate of scoliosis development (40%, 33%, and 0%). The pre-scoliotic position of the inflection point (where lordosis turns into kyphosis), the ratio of the spinal curvatures above and below the inflection point, and the length of the spinal curve above and below the inflection point were significantly different between the five deformity patterns groups, p < 0.05. CONCLUSION: Combination of geometrical parameters of the sagittal profile prior to onset of scoliosis can relate to the development of spinal deformity in pediatric population.

Are Higher Global Alignment and Proportion Scores Associated With Increased Risks of Mechanical Complications After Adult Spinal Deformity Surgery? An External Validation.

BACKGROUND: The Global Alignment and Proportion (GAP) score, based on pelvic incidence-based proportional parameters, was recently developed to predict mechanical complications after surgery for spinal deformities in adults. However, this score has not been validated in an independent external dataset. QUESTIONS/PURPOSES: After adult spinal deformity surgery, is a higher GAP score associated with (1) an increased risk of mechanical complications, defined as rod fractures, implant-related complications, proximal or distal junctional kyphosis or failure; (2) a higher likelihood of undergoing revision surgery to treat a mechanical complication; and (3) is a lower (more proportioned) GAP score category associated with better validated outcomes scores using the Oswestry Disability Index (ODI), Scoliosis Research Society-22 (SRS-22) and the Short Form-36 questionnaires? METHODS: A total of 272 patients who had undergone corrective surgeries for complex spinal deformities were enrolled in the Scoli-RISK-1 prospective trial. Patients were included in this secondary analysis if they fulfilled the original inclusion criteria by Yilgor et al. From the original 272 patients, 14% (39) did not satisfy the radiographic inclusion criteria, the GAP score could not be calculated in 14% (37), and 24% (64) did not have radiographic assessment at postoperative 2 years, leaving 59% (159) for analysis in this review of data from the original trial. A total of 159 patients were included in this study,with a mean age of 58 ± 14 years at the time of surgery. Most patients were female (72%, 115 of 159), the mean number of levels involved in surgery was 12 ± 4, and three-column osteotomy was performed in 76% (120 of 159) of patients. The GAP score was calculated using parameters from early postoperative radiographs (between 3 and 12 weeks) including pelvic incidence, sacral slope, lumbar lordosis, lower arc lordosis and global tilt, which were independently obtained from a computer software based on centralized patient radiographs. The GAP score was categorized as proportional (scores of 0 to 2), moderately disproportional (scores of 3 to 6), or severely disproportional (scores higher than 7 to 13). Receiver operating characteristic area under curve (AUC) was used to assess associations between GAP score and risk of mechanical complications and risk of revision surgery. An AUC of 0.5 to 0.7 was classified as "no or low associative power", 0.7 to 0.9 as "moderate" and greater than 0.9 as "high". We analyzed differences in validated outcome scores between the GAP categories using Wilcoxon rank sum test. RESULTS: At a minimum of 2 years' follow-up, a higher GAP score was not associated with increased risks of mechanical complications (AUC = 0.60 [95% CI 0.50 to 0.70]). A higher GAP score was not associated with a higher likelihood of undergoing a revision surgery to treat a mechanical complication (AUC = 0.66 [95% 0.53 to 0.78]). However, a moderately disproportioned GAP score category was associated with better SF-36 physical component summary score (36 ± 10 versus 40 ± 11; p = 0.047), better SF-36 mental component summary score (46 ± 13 versus 51 ± 12; p = 0.01), better SRS-22 total score (3.4 ± 0.8 versus 3.7 ± 0.7, p = 0.02) and better ODI score (35 ± 21 versus 25 ± 20; p = 0.003) than severely disproportioned GAP score category. CONCLUSION: Based on the findings of this external validation study, we found that alignment targets based on the GAP score alone were not associated with increased risks of mechanical complications and mechanical revisions in patients with complex adult spinal disorders. Parameters not included in the original GAP score needed to be considered to reduce the likelihood of mechanical complications. LEVEL OF EVIDENCE: Level III, diagnostic study.